Panasonic KX-TS15-W - Page 8

m Settings
Selecting the Ringer Volume
You can select the ringer volume by programming. Set to HIGH, MID or
LOW. Your phone comes from the factory set to HIGH.
1 Lift the handset.
2 Press [PROGRAM].
| e The MUTE indicator flashes.
3 Press (6).
A To select LOW, press (1).
To select MID, press (2).
OR
To select HIGH, press (3).
e Each time you press a button, the selected volume will ring.
5 Press [PROGRAM].
e A beep sounds on the
handset.
6 When finished,
replace
the handset.
/
Y,
CA
S
>
2
AD = 4)
= CA
TT
PROGRAM
MUTE Indicator
e To cancel during programming, replace the handset, then start from
step 1.
e If 4 beeps sound during programming, a wrong key was pressed.
Replace the handset, then start from step 1.
e If you change the ringer volume when the ringer is set to OFF (p. 9), the
ringer will automatically turn ON.