Panasonic LP-430U - Page 4

4
Trademarks
 Windows is a registered trademark or trademark of U.S.A. Microsoft Corporation in U.S.A and other
countries. All other product names and companies provided in this manual are trademarks or registered
trademarks of their respective companies.

QR Code is the registered trademarks of DENSO WAVE INCORPORATED.
Applicable Standards and Product Model
This product is applied the following standards. When the system is exported as a single unit or a part
mounted on other machines or equipment, prior to exporting, make sure that the system may meet the
requirement of the standards in countries or regions where the system is to be exported.
Model Type Applicable Standards
LP-430U/
430TU/431U/
431TU/435U/
435TU/
420S9U/
420S9TU/
421S9U/
421S9TU/
425S9U/
425S9TU/
410U/410TU/
411U/411TU
JIS (Japanese Industrial
Standards) compliant type
JIS C 6802: 2011 “Safety of laser products”
LP-430U-A/
430TU-A/
431U-A/
431TU-A/
435U-A/
435TU-A/
420S9U-A/
420S9TU-A/
421S9U-A/
421S9TU-A/
425S9U-A/
425S9TU-A/
410U-A/
410TU-A/411U-
A/411TU-A
FDA (Food and Drug Admin-
istration) regulations compli-
ant type
21 CFR1040.10 and 1040.11 except for deviations pursuant to
Laser Notice No. 50
"PART 1040 PERFORMANCE STANDARDS FOR LIGHTEMIT-
TING PRODUCTS"
LP-430U-C/
430TU-C/
431U-C/
431TU-C/
435U-C/
435TU-C/
420S9U-C/
420S9TU-C/
421S9U-C/
421S9TU-C/
425S9U-C/
425S9TU-C/
410U-C/
410TU-C/
411U-C/411TU-
C
EN/IEC (International Elec-
trotechnical Commission)
standards compliant type (CE
Marking compliant type)
2004/108/EC "EMC order"
2006/95/EC "Low voltage order"
EN55011: 2009+A1: 2010 "Radio Disturbance Characteristics
of Industrial, Scientific and Medical (ISM) Radio-frequency
Equipment"
EN55022: 2010 "Information technology equipment - Radio
disturbance characteristics - Limits and methods of
measurement"
EN60204-1: 2006+A1: 2009 "Safety of Machinery - Mechanical
electric device"
EN60825-1: 2007 "Safety of laser products"
EN61000-6-2: 2005 "Electromagnetic Compatibility (EMC)"
EN61010-1: 2001 "Safety requirements for electrical equipment
for measurement, control and laboratory use"