21
DVQX1158 (ENG)
Basics
Rear dial
There are 2 ways to operate the rear dial, rotating left or right, and deciding by
pressing.
Rotating:
Selection of items or setting of values is performed during the various
settings.
Pressing:
Operations that are the same as [MENU/SET] button, such as
determine settings, etc., are performed during the various settings.
• You can use the rear dial to compensate the exposure (→26) or adjust the
aperture value and shutter speed. The items that can be adjusted differ
according to the recording mode.
Cursor button
• Selection of items or setting of values etc., is performed.
• These operating instructions expresses the up, down, left, and right of the cursor
button as
.
You can perform the following operations while recording. (Some items or settings
cannot be selected depending on the mode or display style the camera is in.)
[
] (ISO sensitivity) ( )
• Set ISO sensitivity (sensitivity to lighting). We recommend higher settings to take
clear pictures in darker locations.
[ ] (White balance) ( )
• Adjusts the colour depending on the light source to ensure natural colour.
[ ] (Drive mode) ( )
• [
] ([Burst])
– Records a burst of still pictures while you press the shutter button fully.
• [
] ([4K PHOTO])
(→27)
• [
] ([Post Focus])
(→30)
• [
] ([Self Timer])
To cancel drive mode, select [ ] ([Single]) or [ ] .
[ ] (AF Mode) ( )
• This allows the focusing method that suits the positions and number of the
subjects to be selected.
To Next Page
Loading...
