33
DVQX1158 (ENG)
Recording
Taking Pictures While Adjusting a Setting
Automatically
(Bracket Recording)
Recording mode:
You can take multiple pictures while automatically adjusting a setting by pressing
the shutter button.
1
Set the menu (→23)
→ [Rec] → [Bracket] → [Bracket Type]
(Exposure Bracket)
Press the shutter button to perform recording while
adjusting the exposure.
(White Balance Bracket)
Press the shutter button once to take three pictures with
different white balance settings automatically.
2
Press to select [More settings] and then press
[MENU/SET]
• If [ ] is set, rotate the rear dial to set the adjustment range.
• Press the shutter button halfway to exit the menu.
3
Focus on the subject and take a picture
■
To cancel [Bracket]
Select [OFF] in step
1
.
Exposure Bracket
■
About [More settings] (step
2
above)
[Step]
Sets the number of pictures to be taken and the exposure
compensation range.
[Sequence] Sets the order in which pictures are taken.
[Single Shot Setting]
[ ]: Takes one picture each time you press the shutter button.
[
]: Takes all the pictures set to be taken when you press the
shutter button once.
Not available for burst recording.
To Next Page
Loading...
