207
Using Menu Functions
Menu list
[No.Reset]
Reset picture file numbers. (The folder number is updated and the file number starts from
0001.)
• To reset folder number to 100:
First, format the card, and reset the file numbers using [No.Reset]. Then, select [Yes]
on the folder number reset screen.
●
A folder number between 100 and 999 can be assigned.
Numbers cannot be reset once folder number reaches 999. In this case, save all necessary
pictures to your computer, and format the card (→28).
[Reset]
The following settings are reset to the default:
■
Recording settings (except for [Face Recog.] and [Profile Setup] settings) and
drive mode
■
Recording settings ([Face Recog.] and [Profile Setup] settings)
■
Setup/custom settings
●
When the setup/custom settings are reset, the following settings are also reset:
• The [World Time] setting
• The [Travel Date] setting (Departure date, Return date, [Location])
• The settings of [Rotate Disp.] and [Picture Sort] in the [Playback] menu
●
Folder numbers and clock settings will not be reset.
[Approved Regulations]
*
The authentication number is displayed.
*
Depending on the country or area where the camera was purchased, this is not
displayed due to differences in specifications.
→ [Setup]
To Next Page
Loading...
