233
Connecting with other devices
Storing recorded still pictures and motion pictures on your PC
Copying still pictures and motion pictures
Preparations
• Install “PHOTOfunSTUDIO” on your computer before starting the copying procedure. (→231)
• Turn on the camera and computer.
1
Connect camera to computer
• Check the direction of the terminals and plug in/out straight holding onto the plug. (Inserting
these at an angle may cause deformation or malfunction)
• Use the supplied USB connection cable or a commercially available Type-C USB connection
cable that complies with USB standards. (Depending on the country or area where the camera
was purchased, the USB connection cable may not be supplied with the camera.)
[Access]
• Do not disconnect the USB connection cable while [Access] is displayed.
[USB/CHARGE] socket
USB connection cable
2
Use “PHOTOfunSTUDIO” to copy pictures to your computer
• Do not delete or move copied files and folders using Windows Explorer or other browsers.
Otherwise, you will not be able to play back or edit the files using “PHOTOfunSTUDIO”.
To Next Page
Loading...
