179
7. Drive/Shutter/Image Stabilizer
2
Press to select [Post
Focus] and press
.
• You can also select by rotating .
3
Decide on the composition and
then adjust the focus.
● Press the shutter button halfway.
● AF detects the focus point on the
screen. (Excluding the edges of the
screen)
• If no areas on the screen can be brought
into focus, the focus indication
blinks
and recording is not possible.
• Maintain the same distance to the subject
and the same composition until recording
finishes.
4
Start recording.
● Press the shutter button fully.
To Next Page
Loading...
