236
9. Flash
Recording Using a Wireless Flash
You can use a Flash (DMW-FL580L/DMW-FL360L/DMW-FL200L:
optional) to record using a wireless flash.
You can separately control the firing of three flash groups and the flash
attached to the hot shoe of the camera.
• The built-in flash does not support wireless flash control.
Placing a Wireless Flash
Place the wireless flash with its wireless sensor facing the camera.
Placement example
When C is placed to erase
the shadow in the background
of the subject that the flash
groups A and B will create
Placement range
When DMW-FL200L is attached
7 m (23 feet)
7 m
(23 feet)
5 m
(16 feet)
5 m
(16 feet)
• The placement range serves as a guide for when recording with the
camera held horizontally. The range differs depending on the surrounding
environment.
• We recommend using a maximum of three wireless flashes in each group.
• If the subject is too close, communication light may affect the exposure.
You can reduce the effect by setting [Communication Light] to [LOW] or
lowering the output with a diffuser or similar device. (239)
To Next Page
Loading...
