233
9. Flash
• When taking pictures with flash with the lens hood attached, the lower
portion of the photo may turn dark and the control of the flash may be
disabled because the photo flash may be obscured by the lens hood. We
recommend detaching the lens hood.
[Flash Adjust.]
Adjusts the flash output if a picture taken using the flash is too bright or
too dark.
1
Select [Flash Adjust.].
● [ ] [Flash] [Flash
Adjust.]
2
Press to adjust the flash
output and then press
.
• It can be adjusted within the range of
[–2 EV] to [+2 EV] in 1/3 EV steps.
• When the intensity of the flash is adjusted, [+] or [-] is displayed on the flash
icon.
• For information about adjusting the flash output when recording using a
wireless flash, refer to page 238.
• [Flash Adjust.] cannot be used when [Wireless] is set to [ON].
To Next Page
Loading...
