291
11. Playing Back and Editing of Images
Displaying a Comparison Screen
You can change a setting while checking the effect by displaying images
with the applied setting value side by side.
Press [DISP.] in the screen of Step 4.
• The image with the current setting is
displayed at the center.
• Touching the image with the current setting
enlarges it.
Touching [
] returns to the original
display.
• If you have selected [Noise Reduction],
[i.Resolution], or [Sharpness], the
comparison screen is not displayed.
Rotate or to change the setting.
Press to confirm the setting.
• RAW images recorded with the camera are always recorded in the [L] size
of [4:3].
With this function, images are processed with the aspect ratio and the angle
of view of [Ex. Tele Conv.] ([Rec]) from the time of recording.
• The [White Balance] item is fixed to the setting from the time of recording for
pictures recorded with multiple exposures.
• The results of RAW processing with this function and with the “SILKYPIX
Developer Studio” software do not completely match.
• [RAW Processing] is not available while using the HDMI output.
To Next Page
Loading...
