364
13. Menu Guide
[Protect]
[Single]/[Multi]/[Cancel]
You can set protection for images so that they will not be
deleted by mistake.
However, if you format the card, the protected images will
also be deleted.
• For information about how to select images, refer to page
362.
• Be careful because the [Protect] setting may be disabled
on a device other than this camera.
[Rating]
[Single]/[Multi]/[Cancel]
If you set any of the five different rating levels for images,
you can do the following:
• Deleting all images except for those with ratings.
• Check the rating level in the file details display in
operating systems such as Windows 10, Windows 8.1,
and Windows 8. (JPEG images only)
1
Select an image. (362)
2
Press to select a rating level (1 to 5) and then
press
.
• When [Multi] is selected, repeat Steps
1 and 2.
• To cancel the setting, set the rating level to [OFF].
To Next Page
Loading...
