384
14. Wi-Fi/Bluetooth
Using Password Authentication to Connect
You can enhance Wi-Fi connection security by using password
authentication through either QR code or manual input.
Scanning QR code to connect
Set [Wi-Fi Password] on the camera to [ON].
• [ ] [Wi-Fi] [Wi-Fi Setup] [Wi-Fi Password] [ON]
Display the QR code .
• [ ] [Wi-Fi] [Wi-Fi Function]
[New Connection] [Remote Shooting
& View]
• You can also perform the same operation
by pressing the Fn button assigned with
[Wi-Fi].
For information about the Fn button, refer
to page 294.
• Press
to enlarge the QR code.
On the smartphone, start up “LUMIX Sync”.
• If a message is displayed indicating that the smartphone is searching for
cameras, close the message.
Select [ ].
Select [Wi-Fi connection].
Select [QR code].
Scan the QR code displayed on the screen of the camera using “LUMIX
Sync”.
• (iOS devices) When a message to confirm the change of destination is
displayed, select [Join].
To Next Page
Loading...
