463
16. Materials
Lens
[The lens is not attached properly. Do not push lens release button
while lens is attached.]
• Remove the lens once, and then attach it again without pressing the lens release
button. (41)
Turn on the camera again, and if it is still displaying, contact the dealer.
[Lens attachment failed. Please make sure the lens is attached
correctly.]
• Remove the lens from the camera body and gently wipe the contacts on the lens
and the camera body using a dry cotton swab.
Attach the lens, turn on the camera again, and if it is still displaying, contact the
dealer.
Battery
[This battery cannot be used]
• Use a genuine Panasonic battery.
If this message is displayed even when a genuine Panasonic battery is used,
contact the dealer.
• If the terminal of the battery is dirty, remove the dirt and dust from the terminal.
To Next Page
Loading...
