87
Menu
(ENG) DVQX1310
Save the camera’s setup information to the card. Since saved setup information can be
imported to the camera, you can apply the same setup to more than one camera.
• Save/load setup information using the card inserted to the card slot 1.
• Setup information can be loaded only to cameras of the same model as this camera.
• You can save up to 10 sets of setup information to one card.
Reset the file number of the next recording to 0001.
Settings: [Slot 1]/[Slot 2]
The following settings are reset to the default:
– Recording settings
– Setup settings ([Wi-Fi Setup] and [Bluetooth] settings)
– Custom settings ([Face Recog.] and [Profile Setup] settings)
– Setup/custom settings (except for [Wi-Fi Setup], [Bluetooth], [Face Recog.] and [Profile
Setup])
[Save/Restore Camera Setting]
> [Setup] > [Save/Restore Camera Setting]
[Save]
Saves the camera’s setup information to the card.
• To save new information, select [New File]; to overwrite an existing file,
select that file.
• When [New File] has been selected, the name of the file to be saved is
displayed on the screen.
[OK]
Saves the file with an automatically created name
displayed on the screen.
[Change the
file name]
Allows you to rename the file before saving it.
[Load] Loads the setup information on the card to the camera.
[Delete] Deletes the setup information on the card.
[No.Reset]
• When recording is performed after resetting this item, the folder number is updated and the
file number starts from 0001.
• A folder number between 100 and 999 can be assigned.
The folder number should be reset before it reaches 999. We recommend formatting the card
after saving the data on a PC or elsewhere.
• To reset the folder number to 100:
1 Format the card.
2 Perform [No.Reset] to reset the file number.
3 Select [Yes] on the folder number reset screen.
[Reset]
MENU
DC-G9BodyP-DVQX1310_eng.book 87 ページ ２０１７年１１月１３日 月曜日 午前９時５９分
To Next Page
Loading...
Need help?
General
