135
5. 4K Photo and Drive Settings
∫ Setting the burst rate
After pressing 3 in step
2 on P134, press 2/1 to select the
burst rate, and press [MENU/SET].
¢1 Number of recordable pictures
¢2 When recording is performed under the test conditions specified by Panasonic.
The burst speed will become slower halfway. However, pictures can be taken until the
capacity of the card becomes full. Depending on recording conditions, the number of burst
pictures that can be taken will be reduced.
• The burst speed may become slower depending on the following settings.
– [Picture Size] (P183)/[Quality] (P184)/[Sensitivity] (P113)/Focus Mode (P97)/[Focus/Release
Priority] (P202)
Burst Mode
[H]
(High speed)
[M]
(Middle speed)
[L]
(Low speed)
Burst speed
(pictures/
second)
Electronic Front
Curtain
5.8 (AFS)
5 (AFC)
4 (AFS)
5 (AFC)
2
Electronic Shutter
10 (AFS)
6 (AFC)
4 (AFS)
6 (AFC)
2
Live View during Burst Mode None Available Available
¢1
With RAW files 15 or more
¢
2
Without RAW files 100 or more
¢
2
To Next Page
Loading...
