137
5. 4K Photo and Drive Settings
∫ Setting the self-timer
After pressing 3 in step
2 on P134, press 2/1 to select the
time, and press [MENU/SET].
Self-timer
Picture is taken 10 seconds after shutter is pressed.
After 10 seconds the camera takes 3 pictures at about
2 seconds intervals.
Picture is taken 2 seconds after shutter is pressed.
• When using a tripod, etc., this setting is a convenient
way to avoid the jitter caused by pressing the shutter
button.
• After the self-timer indicator flashes, recording starts.
• Focus and exposure will be set when the shutter button is
pressed halfway.
• We recommend using a tripod when recording with the
self-timer.
Not available in these cases:
• It cannot be set to [ ] in the following cases.
– When [Simultaneous record w/o filter] of [Filter Settings] is set to [ON]
– When recording with the Bracket function
– When using [Multi Exp.]
• Self-timer is disabled in the following cases.
– In Self Shot Mode
(When taking pictures in Self Shot Mode, you can set the Self-timer in [Countdown]. (P67))
– When recording motion pictures
– When using [Time Lapse Shot]
– When using [Stop Motion Animation] (only when [Auto Shooting] is set)
To Next Page
Loading...
