185
9. Using Menu Functions
Applicable modes:
Type of optical measurement to measure brightness can be changed.
[Metering Mode]
> [Rec] > [Metering Mode]
[]
(Multiple)
This is the method in which the camera measures the most suitable
exposure by judging the allocation of brightness on the whole screen
automatically.
Usually, we recommend using this method.
[]
(Centre weighted)
This is the method used to focus on the subject on the centre of the
screen and measure the whole screen evenly.
[]
(Spot)
This is the method to measure the subject in the spot
metering target A.
• If you set the spot metering target on the edge of the
screen, the metering may be affected by the brightness
around the location.
MENU
To Next Page
Loading...
