9. Using Menu Functions
212
[Economy]
[Sleep Mode]:
The camera is automatically turned off if the camera has
not been used for the time selected on the setting.
[Sleep Mode(Wi-Fi)]:
The camera is automatically turned off if it is not connected
to a Wi-Fi network and has not been used for 15 minutes
(approx.).
[Auto Monitor Off]:
The monitor is automatically turned off if the camera has
not been used for the time selected on the setting.
• Press the shutter button halfway or turn the camera off
and on to cancel [Sleep Mode].
• To turn the monitor on again, press any button or touch
the monitor.
• [Economy] does not work in the following cases.
– When connecting to a PC or a printer
– When recording or playing back motion pictures
– During a slide show
– When recording with [ ] ([4K Pre-Burst]) of the 4K
Photo function
– When using [Multi Exp.]
– When using [Time Lapse Shot]
– When using [Stop Motion Animation] (only when [Auto
Shooting] is set)
• When using the AC adaptor (optional), [Sleep Mode] and
[Sleep Mode(Wi-Fi)] are disabled.
• When using the AC adaptor (optional), [Auto Monitor Off]
is fixed to [5MIN.].
s
[USB Mode]
Sets the communication method when connecting using
the USB connection cable (supplied).
y [Select on connection]:
Select this setting to select the USB communication
system when connecting to another device.
{ [PictBridge(PTP)]:
Select this setting when connecting to a printer supporting
PictBridge.
z [PC]:
Select this setting to export images to a connected PC.
s
> [Setup]
To Next Page
Loading...
