31
Recording
(ENG) DVQX1072
∫ Adjusting the AF Custom settings
1 Press 2/1 to select the AF Custom setting.
2 Press 3/4 to select the items, and then press 2/1 to adjust.
• Pressing [DISP.] will return the default setting.
3 Press [MENU/SET].
Setting the Auto Focus Mode
Applicable modes:
This allows the focusing method that suits the positions and
number of the subjects to be selected.
Press [ ].
• You can also use the button as a function button. (P26)
[AF Sensitivity]
Sets the sensitivity to be applied when adjusting the focus
according to the movement of the subject.
[AF Area Switching
Sensitivity]
Sets the sensitivity level at which the camera switches or moves
the AF area to suit the movement of the subject.
[Moving object
prediction]
Sets the level at which object motion detection is activated in
response to a change in the speed of the subject.
([Face/Eye
Detection])
The camera automatically detects the person’s face and eyes.
An eye closer to the camera will be in focus, while the exposure will be
optimised for the face.
(When [Metering Mode] is set to [ ])
• Up to 15 faces can be detected. Eyes that can be detected are only
those of the face that is in focus.
• You can change the eye to be in focus by touching
the eye in the yellow area.
• If you touch [ ] or press [MENU/SET], the eye
focus setting will be cancelled.
([Tracking])
The camera focuses on the subject you specify.
The exposure will be optimised for the subject.
(When [Metering Mode] is set to [ ])
Focus and exposure will keep on following the
subject even if it moves. (Dynamic tracking)
• Aim the AF tracking area over the subject to be tracked, and press the
shutter button halfway to lock the subject.
• Lock is cancelled when [MENU/SET] is pressed.
DC-GH5BodyGN-DVQX1072_eng.book 31 ページ ２０１７年２月１３日 月曜日 午前１１時４５分
To Next Page
Loading...
