25
DVQX2185 (ENG)
ENGLISH
Getting Started / Basic Operations
A
1
Connect the charger and the AC adaptor with the USB
connection cable.
• Check the direction of the terminals and plug in/out straight holding onto the
plug.
(Inserting these at an angle may cause deformation or malfunction)
2
Connect the AC adaptor to an electrical outlet.
3
Insert the battery.
• The charging lights ([CHARGE])
A
blink and charging begins.
[CHARGE] Light Indications
Charging
status
0 % to 49 % 50 % to 79 % 80 % to 99 % 100 %
[CHARGE]
light
B
Blinking
C
On
D
Off
• If the [50%] light is blinking quickly, then charging is not occurring.
• When the battery is inserted while the charger is not connected to the power
source, the charging lights turn on for a certain period to allow you to confirm the
battery level.
To Next Page
Loading...
