Preparation/Basic “Quick Start Guide”
17
(ENG) DVQX1123
2 Press the shutter button halfway to focus.
A Aperture value
B Shutter speed
C Focus indication
• Aperture value and shutter speed are displayed.
(It will flash in red if the correct exposure is not
achieved, except when set to flash.)
• Once the subject is in focus, the focus indication is
displayed. (When the subject is not in focus, the
indication flashes.)
3 Press the shutter button fully (push it in
further), and take the picture.
• Be careful not to move the camera when you press the shutter button.
• When the image is correctly focused, the picture will be taken, since the [Focus/
Release Priority] is set initially to [FOCUS].
• The [Auto Review] function displays the picture you have
just taken.
• To display the picture in Playback Mode, press [(].
(P47)
10
Check the picture you have taken
DC-GX800EB-DVQX1123_eng.book 17 ページ ２０１６年１２月１日 木曜日 午後５時４９分
To Next Page
Loading...
Need help?
General
