Recording
31
(ENG) DVQX1932
Applicable modes:
This merges a portrait taken with the flash and pictures of the background taken
with burst recording into a single picture in which both the person and background
look bright.
1 Slide the flash open lever.
2 Rotate the monitor to enable Self Shot Mode.
3 Touch [ ] to display the setting screen.
4 Touch [ ] to switch to the Self Shot Mode
for [Night Self Shot].
5 Decide on your poses while looking at the
monitor.
6 Press the shutter button halfway to focus and
then press it fully to take the picture.
• Be careful not to look at the light from the flash and the AF Assist Lamp directly.
• Do not move the camera during burst recording.
• The angle of view will be slightly narrower.
• A moving subject may be recorded with unnatural blurs.
• When a person illuminated by a street light or similar light source is recorded, the
resulting picture may look unnatural.
Taking pictures with nightscapes in the background in Self Shot
Mode ([Night Self Shot])
OFFOFFOFF
OFFOFFOFF
No
Effect
OFFOFFOFF
DC-GX880_GN-DVQX1932_eng.book 31 ページ ２０１９年４月１７日 水曜日 午後１０時２６分
To Next Page
Loading...
