Recording
39
(ENG) DVQX1932
2 Drag the slide bar to make a rough selection of
scenes.
3 Drag the frames to select the frame you
want to save as a picture.
4 Touch [ ] to save the picture.
Controlling Focus After Recording
(Post Focus/Focus Stacking)
Applicable modes:
The camera allows you to take 4K burst pictures while shifting the focus to different
areas. After taking these pictures, you can select the desired focus area.
This function is suited for recording still objects.
It is also possible to select multiple focus areas and create a single merged picture.
(Focus Stacking)
• We recommend that you use a tripod when recording images to be used for Focus
Stacking.
• Use a UHS Speed Class 3 card. (P9)
• When using [Post Focus], the angle of view is narrower.
1 Press [ ].
2 Press 2/1 to select [ON] and press [MENU/
SET].
3 Decide on the composition, and press the
shutter button halfway.
• Auto Focus will detect focus areas on the screen.
(Excluding the edges of the screen)
• If no areas on the screen can be brought into
focus, the focus display (
A
) will flash. Recording
is not possible in this case.
DC-GX880_GN-DVQX1932_eng.book 39 ページ ２０１９年４月１７日 水曜日 午後１０時２６分
To Next Page
Loading...
