40
DVQX1932 (ENG)
Recording
4 Press the shutter button fully to start
recording.
• The focus point changes automatically while
recording. When the icon (
B
) disappears,
recording automatically ends.
• A motion picture in MP4 format will be recorded. (Audio will not be recorded.)
• When [Auto Review] is enabled, a screen that lets you select the desired focus
area will be displayed. (P40)
∫ Cancelling [Post Focus]
Select [OFF] in step
2.
• The camera stops operating for self-protection in the manner described below when
overheated due to, for example, high ambient temperature or recording using the Post
Focus function. Wait until the camera cools down.
– Continuous recording, motion picture recording, and the Wi-Fi connection will be
temporarily disabled.
– If you continue recording even when [ ] is flashing on the screen, a message will
be displayed and the camera will turn off automatically.
1 Select an image with the [ ] icon on the playback
screen, and press 3.
2 Touch the desired focus area.
• If a picture that is in focus is not available for the
selected area, a red frame will be displayed. You
cannot save a picture in this case.
• You cannot select the edges of the screen.
From the time you press the shutter button
halfway until the end of recording:
• Maintain the same distance to the subject and
the same composition.
• Do not operate the zoom.
Selecting the desired focus area and saving a picture
DC-GX880_GN-DVQX1932_eng.book 40 ページ ２０１９年４月１７日 水曜日 午後１０時２６分
To Next Page
Loading...
