225
DVQP1285
Wi-Fi
Wi-Fi Function
■
Before Use
• Complete the date and time settings in advance. (→30)
• To use the Wi-Fi function on this unit, a wireless access point or a destination device
equipped with the wireless LAN function is required.
■
Lighting of the Wi-Fi connection lamp when the Wi-Fi function is in use
Lit: When the Wi-Fi function is ON or connected by
Wi-Fi
Blinking: When sending picture data
■
About the [Wi-Fi] button
In this Owner’s Manual, a function button to which [Wi-Fi] is assigned is referred to as the
[Wi-Fi] button. (At the time of purchase, [Wi-Fi] is assigned to [Fn5] button in recording
mode, and [Fn1] in playback mode.)
• For details on the function button, refer to (→48).
To start up the Wi-Fi function (When in recording mode):
Touch [ ]
Touch [ ]
To Next Page
Loading...
