239
DVQP1285
Wi-Fi
When sending pictures, first select [New Connection], then
select the method of sending pictures.
After you have completed connecting, you can also change
the sending settings, such as the size of pictures to be sent.
■
Images that can be sent
Destination JPEG RAW
MP4
*
1
AVCHD
*
1,
*
2
4K Burst File
*
1
Pictures recorded in
[Post Focus]
*
1
[Smartphone] (→242) ○ –
○
*
3
– –
[PC] (→245) ○ ○ ○ ○ ○
[Cloud Sync. Service]
(→250)
○ –
○
*
3
– –
[Web service] (→247) ○ –
○
*
3
– –
[AV device] (→244) ○ – – – –
[Printer]
*
1
(→243)
○ – – – –
*
1
Sending by [Send Images While Recording] is not available.
*
2
Files larger than 4 GB cannot be sent.
*
3
Excluding motion pictures recorded with [Rec Quality] of [4K].
• Some images may not be played back or sent depending on the device.
• For more information about picture playback, see the operating instructions of the
destination device, or check the WEB service to which you will send the pictures.
[Send Images While Recording]
A picture can be automatically sent to a specified device every time you take it.
• [
] is displayed on the recording screen while connected by
[Send Images While Recording], and [ ] is displayed while
files are being sent.
• To terminate the connection, follow the steps below:
→ [Setup] → [Wi-Fi] → [Wi-Fi Function] → [Yes]
11
• You can terminate the connection or change the send settings by pressing [Wi-Fi]
button. (→226)
You cannot change the settings while sending a still picture. Wait until sending is
complete.
Sending pictures
To Next Page
Loading...
