231
DVQP1285
Wi-Fi
Operating the camera by connecting it to a smartphone
■
Manually entering a password to set up a connection
(On the camera)
→ [Setup] → [Wi-Fi] → [Wi-Fi Function] → [New Connection]
→ [Remote Shooting & View]
SSID and Password
QR Code
• The information (QR Code, SSID and Password) required for
directly connecting your smartphone to this unit is displayed.
• You can also display the information by pressing [Wi-Fi] button on
the camera.
(On your smartphone)
Turn on the Wi-Fi function in the setting menu
On the Wi-Fi setting screen, select the SSID displayed on the
camera
Enter the password displayed on the camera (For first time
connection only)
• If you are using an Android device, marking the box for password display
will allow the device to display the password as you enter it.
Start “Image App” (→228)
Changing the connection method
To change the connection method, follow the steps below:
→ [Setup] → [Wi-Fi] → [Wi-Fi Function]
→ [New Connection] → [Remote Shooting & View]
→ [DISP.] button
or
→ [DISP.] button → [New Connection]
→ [Remote Shooting & View] → [DISP.] button
To Next Page
Loading...
