Basic
- 22 -
[Rec] Mode: ñ
Taking pictures using the automatic function
(Intelligent Auto Mode)
The camera will set the most appropriate settings to match the subject and the recording
conditions so we recommend this mode for beginners or those who want to leave the
settings to the camera and take pictures easily.
•
The following functions are activated automatically.
– Scene Detection/[Stabilizer]/Face Detection/Motion Detection/[i.Exposure]/
Backlight Compensation/[Red-Eye Removal]/[i.Resolution]/[i.ZOOM]/Auto White Balance/
[AF Assist Lamp]
Slide the [Rec]/[Playback] selector
switch to [!], and then press
[MODE].
Press 3/4/2/1 to select [Intelligent Auto],
and then press [MENU/SET].
Press the shutter button halfway to focus.
• The focus indication 1 (green) lights when the subject
is focused.
• The AF area 2 is displayed around the subject’s face
by the Face Detection function. In other cases, it is
displayed at the point on the subject which is in focus.
• The minimal distance (how close you can be to the
subject) will change depending on the zoom factor.
Please check with the recordable range display on
the screen.
(P26)
• You can set the AF tracking by pressing 3. For details,
refer to P77. (AF tracking is canceled by pressing 3
again)
Press the shutter button fully (push it in
further), and take the picture.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
