Panasonic LUMIX DMC-FX40 Basic Operating Instructions

VQT1X72 (ENG)
12
Inserting and Removing the Card (optional)/the
Battery
• Check that this unit is turned off.
• We recommend using a Panasonic card.
Slide the release lever in the direction of
the arrow and open the card/battery door.
• Always use genuine Panasonic batteries
(DMW-BCF10E).
• If you use other batteries, we cannot guarantee
the quality of this product.
Battery: Insert until it is locked by the
lever A being careful about the direction
you insert it. Pull the lever A in the
direction of the arrow to remove the
battery.
Card: Push it fully until it clicks being
careful about the direction you insert it.
To remove the card, push the card until it
clicks, then pull the card out upright.
B: Do not touch the connection terminals of the
card.
•
The card may be damaged if it is not fully inserted.
1:Close the card/battery door.
2:Slide the release lever in the direction
of the arrow.
• If the card/battery door cannot be completely
closed, remove the card, check its direction and
then insert it again.
CARD
R
Y
DMC-FX40&FX48GC-VQT1X72_eng.book 12 ページ ２００９年１月１９日 月曜日 午後１時５３分

Panasonic LUMIX DMC-FX40 Specifications

General

Brand	Panasonic
Model	LUMIX DMC-FX40
Category	Digital Camera
Language	English