15
(ENG) VQT2K80
Inserting and Removing the Card
(optional)/the Battery
• Check that this unit is turned off.
• We recommend using a Panasonic card.
Slide the release lever in the
direction of the arrow and open
the card/battery door.
• Always use genuine Panasonic
batteries (DMW-BCF10E).
• If you use other batteries, we cannot
guarantee the quality of this product.
Battery: Insert until it is locked by
the lever A being careful about
the direction you insert it. Pull the
lever A in the direction of the
arrow to remove the battery.
Card: Push it fully until it clicks
being careful about the direction
you insert it. To remove the card,
push the card until it clicks, then
pull the card out upright.
B: Do not touch the connection terminals of the card.
• The card may be damaged if it is not fully inserted.
1:Close the card/battery door.
2:Slide the release lever in the
direction of the arrow.
DMC-FX66&FX68EB-VQT2K80_mst.book 15 ページ ２００９年１２月２１日 月曜日 午前９時３６分
To Next Page
Loading...
