Recording pictures (advanced)
53
VQT0R26
• The motion images cannot be recorded
without audio.
• The settings of auto focus/zoom/aperture
values are fixed to what they are when
recording starts (in the first frame).
• Depending on the type of card, the card
access indication appears for a while after
recording motion images. However, this is
not a malfunction.
• When you set the picture quality to
[30fpsVGA], we recommend using a high
speed SD Memory Card with “10MB/s” or
greater displayed on the package.
• Depending on the type of SD Memory
Card and how many times it has been
recorded onto or deleted, recording
may stop in the middle. If something
like this happens, clean-up may be
effective. We recommend you clean up
the card using the camera in advance.
(P82)
• We recommend using Panasonic’s SD
Memory Card. (Use only genuine SD
cards with an SD Logo.)
• When motion images recorded with the
camera are played back on other
equipment, the quality of pictures and
sounds may be deteriorated or it may not
be possible to play them back.
• Motion images recorded with setting to
[30fpsVGA], [30fpsQVGA] or [10fpsVGA]
on this camera cannot be played back on
equipment which does not support these
settings.
• In motion image mode [ ], you cannot
use the direction detection function and
the review function.
• You cannot set [MODE2] on the optical
image stabilizer function.
• Please note that the bundled software
includes Quicktime to play back motion
picture files created with the camera on
the PC.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
