Advanced (Recording pictures)
- 120 -
Press 3/4/2/1 to set the return date (year/
month/day), and then press [MENU/SET].
• If you do not want to set the return date, press [MENU/SET]
while the date bar is displayed.
Press 4 to select [LOCATION] and then press 1.
Press 4 to select [SET] and then press [MENU/
SET].
Enter the location.
• For details on how to enter characters, refer to “Entering Text”
on P147.
Press [MENU/SET] twice to close the menu.
Take a picture.
• The number of days that have passed since the departure date is displayed for about
5 seconds if this unit is turned on etc. after setting the Travel Date or when the Travel
Date is set.
• When the Travel Date is set, [—] appears on the lower right of the screen.
To Next Page
Loading...
