Advanced (Recording pictures)
- 80 -
[REC] Mode:
Taking pictures by specifying the aperture/
shutter speed
Set the aperture value to a higher number when you want a sharp focus background. Set
the aperture value to a lower number when you want a soft focus background.
Set the mode dial to [ ].
Rotate the rear dial to set the aperture
value.
• It will switch between aperture setting operation and
Exposure Compensation operation every time the rear
dial is pressed.
Take a picture.
When you want to take a sharp picture of a fast moving subject, set with a faster shutter
speed. When you want to create a trail effect, set to a slower shutter speed.
Set the mode dial to [ ].
Rotate the rear dial to set the shutter speed.
• It will switch between shutter speed setting operation
and Exposure Compensation operation every time the
rear dial is pressed.
Take a picture.
Note
•
Refer to P82 for the available aperture values and the shutter speed.
• The brightness of the LCD monitor/Viewfinder and the recorded pictures may differ. Check the
pictures using the Playback Mode.
• Set the aperture value to a higher number when the subject is too bright. Set the aperture value
to a lower number when the subject is too dim.
• The aperture value and the shutter speed displayed on the screen turn red when the exposure
is not adequate.
• We recommend using a tripod when the shutter speed is slow.
• [ ] cannot be set for Shutter-Priority AE.
Aperture-Priority AE
Shutter-Priority AE
To Next Page
Loading...
