VQT2X28 (ENG)
16
Inserting and Removing the Card
(optional)/the Battery
• Turn the power switch to [OFF] and confirm that the lens barrel is retracted.
• Close the flash.
• We recommend using a Panasonic card.
Slide the release lever in the
direction of the arrow and open
the card/battery door.
• Always use genuine Panasonic
batteries (DMW-BMB9E).
• If you use other batteries, we cannot
guarantee the quality of this product.
Battery: Insert until it is locked by
the lever A being careful about
the direction you insert it. Pull the
lever A in the direction of the
arrow to remove the battery.
Card: Push it fully until it clicks
being careful about the direction
you insert it. To remove the card,
push the card until it clicks, then
pull the card out upright.
B: Do not touch the connection terminals of
the card.
• The card may be damaged if it is not fully
inserted.
1:Close the card/battery door.
2:Slide the release lever in the
direction of the arrow.
LOCK
OPEN
B
LOCK
OPEN
DMC-FZ45&40_EB-VQT2X28_eng.book 16 ページ ２０１０年７月２日 金曜日 午後４時９分
To Next Page
Loading...
