Basic
30
VQT0V63
• [ASPECT RATIO]/[PICT.SIZE]/[QUALITY]
(P77, 78):
– [ ENLARGE]:
/ (6M)/Fine
–[ 4qk6q/10k15cm]:
/ (2.5M EZ)/Standard
–[ E-MAIL]:
/ (0.3M EZ)/Standard
• [AF MODE] (P80):
[ ] (1-area-focusing)
• [AF ASSIST LAMP] (P82):
[ON]
• [METERING MODE] (P80):
[ ] (Multiple)
• You cannot use the following functions in
simple mode.
– High angle mode
– White balance fine adjustment
– Exposure compensation
– Flash output adjustment
– Auto bracket
– [AUDIO REC.]
– [D.ZOOM]
– [COL.EFFECT]
– [PICT.ADJ.]
–[CONT.AF]
– [HIGHLIGHT]
– [PLAY ON LCD]
– Out-of-frame display
– Recording guide line
• You cannot set the following items in
simple mode.
–[TRAVEL DATE]
– [CONVERSION]
∫ Focus range in simple mode
• The zoom magnification values will
change when using the extended optical
zoom.
• Refer to P51 for the tele-macro.
∫ The Backlight Compensation
Backlight refers to when light comes from
the back of a subject.
In this case, the subject, such as a person,
will become dark.
If you press 3, [] (compensating
backlight ON indication) A appears and the
backlight compensation function is
activated. This function compensates the
backlight by brightening the whole of the
picture.
• If you press 3 while [ ] is displayed,
[ ] disappears and the backlight
compensation function is canceled.
• We recommend using the flash when you
use the backlight compensation function.
(When using the flash, it is fixed to Forced
ON [ ].)
• The flash setting is fixed to AUTO/Red-eye
reduction [ ] when the backlight
compensation function is set to [OFF].
5 cm (0.17 feet)
2 m (6.6 feet)
1 m (3.3 feet)
3
BACKLIGHT
3
BACKLIGHT
To Next Page
Loading...
