(ENG) VQT5B74 11
Charging the battery
• Use the dedicated charger and battery.
• The battery is not charged when the camera is shipped. Charge the
battery before use.
• We recommend charging in a location where the ambient temperature is
between 10 °C and 30 °C.
Insert the battery terminals and attach the battery to the
charger
Ensure [LUMIX] faces outwards.
Connect the charger to the electrical outlet
Charging light ([CHARGE])
On: Charging in progress
(approx. 155 min. if fully depleted)
Off: Charging complete
If light is flashing:
• Charging may take longer than normal if
battery temperature is too high or too low
(charging may not be completed).
• Battery/charger connector is dirty. Clean
with a dry cloth.
●
The battery becomes warm after using it and during and after charging. The
camera also becomes warm during use. This is not a malfunction.
●
You cannot charge the battery of this unit using a USB connection cable.
■
About batteries that you can use with this unit
The battery that can be used with this unit is DMW-BMB9E.
To Next Page
Loading...
