Advanced (Recording pictures)
You can set the color temperature manually for taking natural pictures in different lighting
conditions. The color of light is measured as a number in degrees Kelvin. As the color
temperature increases, the picture becomes more bluish. As the color temperature
decreases, the picture becomes more reddish.
_Select [_E]] [WB SET].
and then touch K
• The color temperature setting screen can also be
displayed by pressing the cursor button toward ,i,.
_ Touch the color bar.
temperature setting
• It is also possible to set the values by touching
[A]/[•] or pressing A/V of the cursor button.
• You can set a color temperature from [2500K] to [10000K].
_ Touch [SET].
You can finely adjust the White Balance when you cannot acquire the desired hue by
setting the White Balance.
Select the White Balance and then touch
[ADJUST.].
• The White Balance adjust screen can also be
displayed by pressing the cursor button toward V.
Touch within the frame to finely adjust.
• You can finely adjust also by touching [G+]/[M ]/[A]/[B], or pressing ,i./V/_l/l_ of the
cursor button.
_1 : A(AMBER: ORANGE)
I1_ : B (BLUE: BLUISH)
• : G÷ (GREEN: GREENISH)
• : M (MAGENTA: REDDISH)
_ Touch [SET].
• If you finely adjust the White Balance to A (amber), the White Balance icon on the screen will
change to orange. If you finely adjust the White Balance to B (blue), the White Balance icon on
the screen will change to blue.
• If you finely adjust the White Balance to G+ (green) or M (magenta), [+] (green) or [ ]
(magenta) appears beside the White Balance icon on the screen.
• Press [DISPLAY] to return to the center point.
• Select the center point if you are not finely adjusting the White Balance.
• The White Balance fine adjustment setting is reflected in the picture when using the flash.
• You can finely adjust the White Balance independently for each White Balance item.
• The White Balance fine adjustment setting is memorized even if the camera is turned off.
88 VQT2S30
To Next Page
Loading...
