Advanced (Recording pictures)
• The White Balance fine adjustment level returns to the standard setting (center point) in the
following cases.
-When you reset the White Balance in [_n_] or [_._]
- When you reset the color temperature manually in [ _[] ]
Bracket setting is performed based on the adjustment values for the White Balance fine
adjustment, and 3 pictures with different colors are automatically recorded when the
shutter button is pressed once.
Finely adjust the White Balance in step 2 of the
"Finely adjusting the White Balance" procedure,
and touch [_]/[8] to set the bracket.
• Bracket settings can also be made by rotating the rear dial.
[_] or rear dial right: Horizontal (A to B)
[_] or rear dial left: Vertical (G+ to M )
_ Touch [SET].
• [BKT] is displayed in White Balance icon in the screen when the White Balance Bracket is set.
• The White Balance Bracket setting is released when the power has been turned off (including
Sleep Mode).
• Pictures can be taken with White Balance Bracket regardless of the drive mode settings.
• You will only hear the shutter sound once.
• White Balance Bracket cannot be set when the [QUALITY] is set to [RAW--*-"],[RAW.*-], or [RAW].
• White Balance Bracket will be disabled when the Multi Film Bracket is set.
• White Balance Bracket does not work when recording motion pictures.
etting the Light Sensitivity
This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure
enables pictures to be taken even in dark places without the resulting pictures coming out
dark.
_ Press • (ISO).
_ Touch the ISO sensitivity to select,
_ Touch [SET],
• You can also press the shutter button halfway to set.
VQT2S30 89
To Next Page
Loading...
