Advanced (Recording pictures)
_ Touch the item.
_ Touch the slide bar.
• Registered settings are memorized even if the
camera is turned off.
_ Touch [MEMORY].
Touch [MY 1] or [MY 21.
FILM FILM
• You can register 2 settings. ([MY FILM 1] and
[MY FILM 2])
(After registering, the Film Mode name that was
registered previously is displayed.)
• [STANDARD] is registered in [MY FILM 1] and
[MY FILM 2] at the time of purchase.
_ Touch [SET].
• You can also press the shutter button halfway to set.
Item I Effect
(_ [CONTRAST]
O [SHARPNESS]
[SATURATION]
[NOISE
REDUCTION]
Increases the difference between the brightness and the
[+] darkness in the picture.
Decreases the difference between the brightness and the
[--] darkness in the picture.
[+] The picture is sharply defined.
[--] The picture is softly focused.
[+] The colors in the picture become vivid.
[--] The colors in the picture become natural.
The noise reduction effect is enhanced. Picture resolution may
[+] deteriorate slightly.
The noise reduction effect is reduced. You can obtain pictures
[--] with higher resolution.
• Noise may become visible when you take pictures in dark places. To avoid picture noise, we
recommend setting [NOISE REDUCTION] towards [÷] or setting the items except [NOISE
REDUCTION] towards [ ] to take pictures.
• If you adjust a Film Mode, [+] is displayed beside the Film Mode icon on the screen.
• You cannot adjust [SATURATION] in the black and white settings in Film Mode.
• Film Mode cannot be adjusted in the Intelligent Auto Mode, Advanced Scene Mode and Scene
Mode.
92 VQT2S30
To Next Page
Loading...
