Advanced (Recording pictures)
It will take pictures changing the type of film in accordance with the setting every time the
shutter button is pressed. (Up to 3 pictures)
_ Touch [41]/[1_] [MULTI FILM].
to select
_ Select [MULTI 1], [MULTI 2], or
FILM FILM
[MULTI FILM 3], and then touch [41]/[1_] to
select the film to be set for each.
• [OFF] can be selected only for [MULTI FILM 3].
_ Touch [SET].
• You can also press the shutter button halfway to set.
_ Focus on subject a picture.
the and take
• It will continuously take pictures by keeping the shutter button pressed when it is set to
Burst Mode. (Up to 3 pictures)
• When using a self-timer, up to 3 pictures with set film will be taken if the shutter button is
pressed. (It will operate same as [("_)_0]even if it is set to [_._0_].)
• Multi film indication ([1_]) displayed on the screen will flash until all pictures of preset
amount are taken.
• [STANDARD] is registered in [MULTI FILM 1], [MULTI FILM 2] and [OFF] is registered in
[MULTI FILM 3] at the time of purchase.
• White Balance Bracket will be disabled when the Multi Film Bracket is set.
• Motion pictures are recorded with the settings for the [MULTI FILM 1] setting.
VQT2S30 93
To Next Page
Loading...
