Advanced (Recording pictures)
It will switch automatically to viewfinder display when an eye or
object gets near the viewfinder using an eye sensor. It will return
[LVF/LCD AUTO] to LCD monitor display when it goes away.
[OFF]/[ON]
• LCD monitor display and viewfinder display can be switched manually by pressing [LVF/LCD].
(P42)
It is possible to set how the [1_3] button to toggle to Intelligent
Auto Mode will operate.
[1_ [SINGLE PRESS]:
BUTTON SWITCH] It will switch to Intelligent Auto Mode by pressing [1_].
[PRESS AND HOLD]:
It will switch to Intelligent Auto Mode by pressing [1_] for a while.
I Enables/disables the motion picture button.
[_ BUTTQN]
This changes the angle of view during motion picture recording
[_ REC AREA] and still picture recording.
[11_1](Picture)/[_] (Motion picture)
• The recording area indicated is a guide line.
This will switch display between the number of recordable
3ictures and available recording time.
o:_ [REMAINING SHOTS]:
[REMAINING DISP,] This will display the number of recordable pictures for still
)ictures.
j:@ [REMAINING TIME]:
This will display the available recording time for motion pictures,
Enables/disables the Quick Menu during the touch operation.
]OFF]: Touch Quick Menu icon is not displayed on the screen,
and the Touch Quick Menu is disabled.
[TOUCH Q.MENU]
[ON]: Touch Quick Menu icon is displayed on the screen,
and the setting by the Touch Quick Menu is enabled
when touched the icon.
VQT2S30 141
To Next Page
Loading...
