Advanced (Recording pictures)
Enables/disables the Touch Shutter function.
[OFF]:
[TOUCH SHUTTER]
[ON]:
Touch Shutter icon is not displayed on the screen, and
the Touch Shutter function is disabled.
Touch Shutter icon is displayed on the screen, and
[ON]/[OFF] of the Touch Shutter function can be
switched when the icon is touched.
When playing back the pictures, this allows you to set either to
[TOUCH GUIDE] display or not display the guide screen of the touch panel.
[OFF]/[ON]
This allows you to set the speed of continuously forwarding or
rewinding pictures using touch operation.
[H]: High speed
[L]: Low speed
Sets if the operation switch guide when the mode dial is switched
[DIAL GUIDE] to []_, _, _ and [] is to be displayed or not.
[OFF]/[ON]
• It will display dial operation guide to the screen that is possible to
perform Exposure Compensation, Program Shift, aperture setting, or
shutter speed setting when set to [ON].
_) Dial operation guide
The last operated menu position is saved even if the camera is
[MENU RESUME] turned off.
[OFF]/[ON]
[P XEL REFRESH, 'troW_lePeir_°rmoptimization of imaging device and image
I Ip g
• Imaging device and image processing is optimized when the camera is purchased. Use this
function when bright spots not in subject get recorded, and it is bothering you.
• Turn the camera off and on after the pixels are corrected.
Dust reduction to blow off the debris and dust that have affixed to
[SENSOR CLEANING] the front of the imaging device is performed.
• Dust reduction function will operate automatically when the camera is turned on, but you can
use this function when you see dust. (P186)
142 VQT2S30
To Next Page
Loading...
