Recording
- 88 -
∫ Move the AF area easily with [DIRECT FOCUS AREA] function
When the [DIRECT FOCUS AREA] in the [CUSTOM] menu is set to [ON] while [š], [ ]
or [Ø] is selected, it is possible to move the AF area directly with the cursor button.
With [ ], you can move the enlarged position.
•
Use the functions that are assigned to the cursor button, such as [AF MODE], [WHITE
BALANCE], [SENSITIVITY] or [DRIVE MODE], by assigning them to the menu item of the
Quick Menu (P59).
Note
•
The spot metering target can also be moved to match the AF area when the
[METERING MODE] (P127) is set to [Ù]. At the edge of the screen, the metering may be
affected by the brightness around the AF area.
• [DIRECT FOCUS AREA] is fixed to [OFF] in Creative Control Mode.
To Next Page
Loading...
