• Check that the camera is turned off.
• Change lenses where there is not a lot of dirt or dust.
_Turn the lens and the in the direction of the
® body ®
rear
cap cap
arrow to detach them.
• Do not put your hands inside the mount.
_ Align fitting ® (red
the lens marks
marks) on the camera body and the lens
and then rotate the lens in the direction
of the arrow until it clicks.
• Do not press the lens release button @ when you
attach a lens,
• Do not try to attach the lens when holding it at an
angle to the camera body as the lens mount may
get scratched.
_ Detach the lens
cap.
(ENG)VQT3N42 1 3
To Next Page
Loading...
