- 137 -
Recording
[]/[]/[]
Note
•
Refer to P83 for details.
Adjusting the picture quality for the recorded pictures.
Applicable modes:
1 Press 2/1 to select [COLOR] or [B/W].
2 Press 3/4 to select the items, and then press 2/1 to adjust.
•
If you adjust the picture quality, [_] is displayed beside the picture quality adjustment
icon on the screen.
• [SATURATION] cannot be adjusted when [B/W] is selected.
• Picture quality cannot be adjusted in the Intelligent Auto Mode and the Scene Mode.
3 Press [MENU/SET].
Note
•
Noise may become visible when you take pictures in dark places. To avoid picture noise, we
recommend setting [NOISE REDUCTION] towards [_] or setting the items except [NOISE
REDUCTION] towards [`] to take pictures.
[SELF-TIMER]
[PICTURE ADJUST]
Item Effect
[CONTRAST]
[r]
Increases the difference between the brightness and the
darkness in the picture.
[s]
Decreases the difference between the brightness and the
darkness in the picture.
[SHARPNESS]
[r] The picture is sharply defined.
[s] The picture is softly focused.
[SATU RATION]
[r] The colours in the picture become vivid.
[s] The colours in the picture become natural.
[NOISE
REDUCTION]
[r]
The noise reduction effect is enhanced. Picture resolution may
deteriorate slightly.
[s]
The noise reduction effect is reduced. You can obtain pictures
with higher resolution.
To Next Page
Loading...
