Connecting to other equipment
- 174 -
∫ Usable functions
Operate with the remote control for the TV.
¢1 This is displayed only when 3D playback is possible.
¢2 This is not displayed during 3D playback.
Multi Playback
This is displayed initially when using the VIERA Link.
3/4/2/1: Select the image.
[OK]: Go to one screen display.
Red button: Switch the types of data to play back.
[OPTION]: Display the Playback Mode selection screen.
•
The type of data for playback changes in the order of [ALL] >
[] > [] > [] > [] > [ALL].
• Either the [NORMAL PLAY], [SLIDE SHOW], [CATEGORY
PLAY], [FAVORITE PLAY] or the [CALENDAR] can be selected
in the Playback Mode selection screen when [ALL] is selected.
One screen display
Select the image while in Multi Playback, and then press
[OK].
2/1: Go to previous/next image.
3: 2D/3D switch
¢1
4: Return to Multi Playback.
[OK]: Playback the motion picture (when motion
picture is selected).
Red button: Start the Slide Show.
[OPTION]: Slide show settings
¢2
, display the recording
information switch
•
During Motion Picture Playback, use 2/1 for back/forward and
4 to stop playback.
Slide show
Press Red button during one screen display.
2/1: Go to previous/next image (when Slide Show
is paused/when motion picture is played
back).
4: Finish the Slide Show and return to one
screen display.
[OK]: Pause.
[OPTION]: Go to Slide Show setting screen.
¢2
• To playback the audio of the motion pictures, set the [SOUND] in
the Slide Show setting screen to [AUTO] or [AUDIO].
A Operation icon
To Next Page
Loading...
