Recording
- 70 -
Note
•
With the Extra Tele Conversion, for example, when it is set to [ ] (equal to 3 million pixels), it
will take the picture using the 3 million pixels in the centre out of the 12.1 million pixels of the
imaging device, resulting to be more of a telephoto picture.
• When the Extra Tele Conversion is used, angle of view for still pictures will be different from the
angle of view for motion pictures because the zoom factor is different between them. Angle of
view for recording can be checked beforehand by matching the [ REC AREA] (P145) setting
to the mode you wish to record in.
• If you use the zoom function after focusing on the subject, focus on the subject again.
• When using the Digital Zoom, [STABILIZER] may not be effective.
• If camera shake (jitter) is a problem during Digital Zooming, it is recommended that
[STABILIZER] be set to [MODE1].
• When using the Digital Zoom, we recommend using a tripod and the self-timer (P83) for taking
pictures.
• The AF Mode is fixed to [Ø] when using the Digital Zoom.
• The Extra Tele Conversion and Digital zoom cannot be used in the following cases.
– When [QUALITY] is set to [ ], [ ] or [ ]
To Next Page
Loading...
