Recording
- 88 -
Up to 23 points for each AF area can be focused. This is effective when the subject is not
in the centre of the screen.
(AF area frame will be same as image aspect ratio setting)
Note
•
The 23 AF areas can be divided into 9 areas and the area to be focused can be set. (P89)
• AF area is not displayed until it is in focus. Also, when the [FOCUS MODE] is set to [AFC], the
AF area is not displayed even if it is in focus.
• The camera is focusing on all the AF areas using [ ] when multiple AF areas (max. 23 areas)
light at the same time. If you want to determine the focus position to take pictures, switch the
AF Mode to [Ø].
The camera focuses on the subject in the AF area on the screen.
Note
•
Position and size of the AF area can be changed. (P89)
• When the subject is not in the centre of the composition in [Ø], you can bring the subject into
the AF area, fix the focus and exposure by pressing the shutter button halfway, move the
camera to the composition you want with the shutter button pressed halfway, and then take the
picture. (Only when the [FOCUS MODE] is set to [AFS].)
About [ ] (23-area-focusing)
About [Ø] (1-area-focusing)
To Next Page
Loading...
