Panasonic Lumix DMC-GF3

- 175 -
Connecting to other equipment
Selecting a single picture and printing it
1 Press 2/1 to select the picture and then press [MENU/
SET].
2 Press 3 to select [PRINT START] and then press [MENU/SET].
•
Refer to P176 for the items which can be set before starting to print the pictures.
• Disconnect the USB connection cable after printing.
Selecting multiple pictures and printing them
1 Press 3.
2 Press 3/4 to select an item and then press [MENU/SET].
Item Description of settings
[MULTI SELECT]
Multiple pictures are printed at one time.
• Press 3/4/2/1 to select the pictures and then press [MENU/SET].
(When [MENU/SET] is pressed again, the setting is canceled.)
• Once the selection is completed, press 2 a few times to select [OK],
and press [MENU/SET].
[SELECT ALL] Prints all the stored pictures.
[PRINT SET
(DPOF)]
Prints the pictures set in [PRINT SET] only. (P156)
[FAVORITE] Prints the pictures set as favorites only. (P155)
3 Press 3 to select [PRINT START] and then press [MENU/SET].
•
If the print check screen has appeared, select [YES], and print the pictures.
• Refer to P176 for the items which can be set before starting to print the pictures.
• Disconnect the USB connection cable after printing.
100
_
0001100
100
_
0001
0001
100
_
0001
PLEASE SELECT
THE PICTURE TO PRINT
SELECT
SELECT
PRINT
PRINT
PictBridge
PictBridge
PictBridge
MULTI PRINT
MULTI PRINT