Basic
- 50 -
Touch [ ] to switch the monitor screen.
• Screen will switch as follows:
– With information
– Detailed information display
¢1
(P181)
– Histogram display
¢1
(P181)
– Without information (Highlight display)
¢1, 2, 3
– Without information (A)
¢3
¢1 It is not displayed during the Playback Zoom, while playing
back a motion picture, or during slide show.
¢2 This is displayed if [HIGHLIGHT] (P138) in the [CUSTOM]
menu is set to [ON].
¢3 If it is not operated for a certain length of time, [ ] alone will be displayed.
• Histogram is displayed in R (red), G (green), B (blue), and Y (luminance) during the playback.
Using the Playback Zoom
Touch the part to enlarge firmly.
1k>2k>4k>8k>16k
•
You can also enlarge/reduce the picture by rotating the control
dial.
• When you change the magnification, the zoom position indication
A appears for about 1 second.
• The more a picture is enlarged, the more its quality deteriorates.
• You can move the enlarged part by dragging (P10) the screen.
• Picture will return to the original size (1k) by touching [ ].
• When you touch [ ], the magnification becomes lower.
Changing the information displayed on the playback screen
To Next Page
Loading...
